The TP-Link TD-8810 Modem/Router is an excellent choice for those on a tight budget requiring an ASDL1, ADSL2 or ADSL2+ Annex A or Annex M compatible Modem to run in bridge mode (modem only).
Fast, Easy Set UpSetting the device to bridge mode is a breeze thanks to the Setup Utility supplied on the Resource CD. If you prefer to use the Web interface the Quick Setup wizard performs the same job in just a few clicks.
Everything You NeedThe TD-8810 comes with an ADSL2+ Filter/Spliter, Quick Setup guide, Resource CD and one ethernet cable. This is all you need to connect up your Router or PC, plus phone, to your existing ADSL enabled phone line.
Reliability and StabilityIf you are having issues because of the quality of your telephone line then the Broadcom chipset, in the TD8810, will definitely be an advantage. This is because Broadcom chipsets can tolerate higher signal variations than other ADSL chipsets and in most cases will maintain your ADSL connection more reliably and for longer.
Avoid Configuration IssuesIf you already have a good quality Router with QoS capabilities or if you are planning on buying a VoIP ATA with inbuilt Router then setting the Modem to bridge mode will avoid issues arising from Double-NAT and Port Forwarding configuration errors.
Bridge Mode (modem only)If you already own (or plan to purchase) an ATA with a builtin router or a QoS and/or Wireless Router and ...
Modem/Router ModeSetting up the initial PPPoE or PPPoA connection for your ISP is very easy. You can use either the Web interface and Quick Setup wizard or the supplied Setup Utility. When it comes to setting up Virtual Servers (Port Forwarding) and QoS you will need to use the Web interface and the Advanced WAN configuration options. Below are examples of typical uses when configured as a Modem and NAT Router combination.
TD-8810 Product Rating
TD-8810 Feature Chart
The TP-Link TD-8810 Modem/Router features a Broadcom BCM6338 Single-chip ADSL2+ bridge/router solution. The integrated ADSL2+ transceiver is powered by a 256-MHz MIPS32 CPU with a performance rating of 280 Dhrystone MIPS (DMIPS). The MIPS32 CPU comes with Memory Management Unit (MMU), 16-KB Instruction-cache (I-cache) and 8-KB Data-cache (D-cache). The Modem supports full-rate ADSL connectivity (ie ADSL1, ASDL2 & ADSL2+) conforming to the ITU and ANSI specifications. In addition to the basic DMT Physical Layer (PHY) functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and is compliant with the ITU I.432 ATM PHY standards. The TD-8810 is a complete plug-and-play solution with a standard Ethernet port that can be directly connected to any 10M/100M Ethernet device supporting Auto MDI/MDIX including Routers, PC LAN ports and Switches.The TD-8810 can be easily configured via its Web Interface and also comes with utility software, Quick Installation Guide and a Resource CD to ensure trouble free configuration. With TP-LINK’s excellent circuit design and high quality production, you are assured of high performance, good stability and ease of use.
Home · Policy · Contact Us · Login · Today is Thursday 24 August, 2017 · Copyright © 2006-2009 The VoIP Store.net